--------------------------
Lasercut cork pinboard

Cork board

Use the design template and instructions below to create a beautiful custom corkboard.

Preparation

Required material
Machine Used

Of course, you can also produce this pattern with all other machines in the Speedy laser engraver series .

Tip

 Try a variety of different designs to suit your client or personal preference.

Cork Pin Board

ZIP

Download now

Step by step

Trotec laser print settings: cork 6mm
Step 1

Step 1: Design

Import our design template and adapt it to your preferences. With the relief mode and the two gray levels in the graphic, you can engrave two different shades in one go in the cork. To find out which grayscale achieves which color change, first apply the grayscale matrix.

Send the graphic for the corkboard to your Trotec laser engraver with the following settings:

Process mode Resolution Cut line
Relief 333dpi none
Halftone Others
Color Enhanced geometries

Tip:

Because the corkboard is mostly viewed from a distance, you can use a coarser resolution of 333dpi. A higher resolution will not be seen by the human eye, so you can save a lot of time in the laser engraving process.

Cork engraving with a laser
Step 2

Step 2: Laser process the cork

Lay the cork piece in your Trotec laser engraver and cover the rest of the working area completely. The large nozzle gives the best results with this material. The parameters can of course vary depending on the laser machine used and the available laser power.

Laser Parameters: Engraving

Color Process Power % Speed % ppi/Hz
Black Engrave CO2 50 70 500
Passes Air Assist Z- offset Advanced
1 ON 0mm High Quality

Laser Parameters: Scratching

Color Process Power % Speed % ppi/Hz
Red Cut CO2 12 4 1,000
Passes Air Assist Z-offset Advanced
1 ON +9 mm -

Laser Parameters: Cutting

Color Process Power % Speed % ppi/Hz
Blue Cut CO2 60 1 1,000
Passes Air Assist Z- offset Advanced
1 ON 0mm -

Tip:

Cover the workspace very carefully when working with cork. This will help you achieve the best extraction performance and avoid flaming during cutting.

Trotec laser print settings: MDF 6mm
Step 3

Step 3: Laser-template MDF support plate

For additional stability of the cork and to help it attach better, we placed a slightly smaller sized MDF board on the back. This also allows you easily attach wall hooks. Then send the MDF-template graphics to the laser device with the following settings:

Process mode Resolution Cut line
Cut Job 1000dpi None
Halftone Others
Color Enhanced geometries
Laser cutting MDF plate
Step 4

Step 4: Laser process the MDF

Lay the MDF plate in your Trotec laser machine. The parameters can obviously change depending on the laser machine used and the available laser power.

Laser parameters Color Process Power % Speed % ppi/Hz
Cutting Red cut CO2 90 0.4 1,000
Passes Air Assist Z offset Advanced
1 ON 0mm -

We used the JobControl® default settings for MDF with 6mm thickness.

Finishing of the laser cut cork pinboard
Step 5

Step 5: Cleaning and assembly

Clean the cut edges of the cork with a damp cloth and attach the MDF plate to the back of the cork.

Your personalized corkboard is now finished!

Precise laser engraving cork

Inspiration

Personalise the noticeboard for a business, Club or private person.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo