Black marking on anodized aluminum
High-quality dark markings on anodized aluminum
Achieve desired results with short pulse durations
Shortened pulse durations can be set with a MOPA laser machine, which is the key to creating black marks on anodized aluminum. With this process, the short pulse durations repaints the material but does not remove the anodized layer or damage the surface. This technique is comparable to the production of tempering colors on stainless steel, but different in its own way. The filling line distance can be set to adjust in a wide range of varying shades from grays up to deep and rich black: The smaller the distance, the deeper the marked color becomes.
Setting the proper laser parameters:
Using a 20 watt MOPA marking laser, we recommend the use of the F-254 lens as it fits the spot diameter for this application perfectly. The following parameters should also be set:
Power | Speed | Frequency | Pulse duration |
---|---|---|---|
50% | 1500 mm/s | 200 kHz | 8 ns |
Focus | Filling lines distance | Passes |
---|---|---|
In focus | 0.001 mm bidirectional for a rich black 0.002 - 0.005 mm bidirectional for gray tones | 1 |
Account for the following when processing this application:
It should be noted that coated or anodized layers can vary quite greatly with each material. The engraving page should always be used for processing black markings and if you need further assistance, contact us. One of our top qualified and highly motivated laser experts will gladly assist you with any additional questions or problems that you have.
You might be also interested in the following:
Do you need something else?
Show me a machine demo.
Request a web/on site demo.
Technical support
We help you solve your Trotec laser machine problems.
Technical Support for Trotec laser machines as well as tips & tricks for laser marking, laser engraving and laser cutting.