--------------------------
  1. Trotec Laser
  2. Laser projects
  3. Coaster from acrylic and wood
wooden coaster laser cut

Coaster from acrylic and wood

Create great effects with two different materials without wasting material.
(To view the full materials range please visit www.engraving-supplies.co.uk)

Preparation

Required material
  • 2 sheets of TroGlass Colour Gloss, one with double-sided adhesive tape (available at Trotec) 
  • 2 sheets Alder wood 3 mm thick, one with double-sided adhesive tape (available at Trotec)
  • Covering material and adhesive tape
Machine used

For this sample you can use any laser machine from the Speedy Series.

Important information
  • Use the acrylic cutting grid table or the acrylic slat cutting table.
  • Remove the protective foil from the side of the acrylic that you want to engrave. Leaving the tape on the bottom side protects the acrylic sheet from scratches during handling.
Acrylic Wood Coaster

PDF

Download now

Step by step

acrylic coaster laser cut
Step 1

Step 1: Import /create design template

Import our design template into your graphic program and adapt it according to your needs. Remove the protective foil from the side of the acrylic that you want to engrave.

 PRINT SETTINGS

process mode resolution cut line
standard 500 dpi none
halftone others
black & white

enhanced geometries
inner geometries first
laser cutting acrylic and wood
Step 2

Step 2: Laser process

Engrave and cut out the design (B) from the acrylic sheet with adhesive tape. For the best results, we recommend using an acrylic cutting grid table or acrylic slat cutting table. These tables minimise the reflections of the laser beam on the back of the material. Cover the rest of the table and remove the protective film from the top side.
Next, cut the outer contour (B) from the acrylic without adhesive tape.

LASER PARAMETERS FOR ACRYLIC

colour process power (%) speed (%) ppi/HZ
black engrave CO2 14 20 500
red cut CO2100 1 1000
passes Air Assist Z-Offset Advanced
1 on - -
1 on - -

LASER PARAMETERS FOR ALDER WOOD

colour process power (%) speed (%) ppi/HZ
black engrave CO2 45 50 500
red cut CO2 100 1.4 1000
passes Air Assist Z-Offset Advanced
1 on 6 -
1 on - -

INFO:

  • We used the standard laser parameters from Jobcontrol®, which are optimised for speed
  • Thanks to the z-offset, you get a particularly smooth engraving.
  • The material parameters used in JobControl® can be downloaded from www.troteclaser.co.uk
wooden coaster laser cut
Step 3

Step 3: Post-processing

The material requires no cleaning after engraving and cutting. Just remove the protective foil from the back of the cut acrylic elements. Remove the cover from the cut-out circles and alternate the position of the acrylic and wood items starting from outside. This will create great effects with two different materials without wasting any material.

Inspirations

  • If you wish, you can optimise your results by using the "quality" laser parameters
  • The fiber laser source of the Speedy flexx series creates particularly good results on darker acrylic
  • If you use a 1.5" lens, the engraving on acrylic becomes very bright. You can also cut 3 mm material with this lens.

Speedy series
 The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo