Wall decoration: Letters

Preparation

Used material

3 pcs. TroGlass in different colors
Distance holders R15-15-FL

Machine used

Speedy 400
120 watts
2" lens
vacuum table with acrylic cutting grid table

Of course, this pattern can also be copied with all other machines of the Speedy laser engraver series.

Wall Decoration Letters

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Step 1: Import the graphic file

Import our template and adapt it to your requirements. Send each of the jobs to the laser using the driver settings below.

Print Settings

Process mode	Resolution	Cut line
Standard	500dpi	none

Halftone	Others
Color	Optimized Geometries, inner geometries first

Step 2

Steps 2: Laser process

The laser parameters may vary depending on the type of laser machine and available laser power.

Laser parameters:

Color	Process	Power (%)	Speed (%)	ppi/Hz
red	Cut CO2	100	1,2	5000

Passes	Air Assist	Z-Offset	Direction	Advanced
1	ON	-	-	-

Step 3

Step 3: Assembly

With the back plate mark the drill holes in your wall. After that place the plate to the wall and fix it with the distance holders to the wall. Now add the colored acrylic letters to the distance holders and secure them with an Allen key. That's how easy it is to make this individual wall decoration with distance holders.

Preparation

Materials

3 sheets of TroGlass in different colors
Standoffs (quantity dependent on signage needs)
1 electric drill (with bit) or 1 screwdriver
1 Allen key

In the sample application described below, we used TroGlass Satins (1/8") and standoffs (product code: R15-15-FL) from Trotec.

Trotec Laser and Accessories

Speedy 400 (120 W)
2" lens
Vacuum table and acrylic cutting grid table

NOTE: You can use any laser system from the Speedy series for this application.

Wall Decoration Letters

ZIP

Download now

ZIP

Download now

Step by step

Step 1

Step 1: Prepare the Artwork

Create your own artwork, or download our template plates (above) and adjust it to your liking. Send the file to JobControl® using the recommended Print settings below.

Print Settings

Process mode	Resolution	Cut line
Standard	500dpi	none

Halftone	Others
Color	Optimized Geometries, inner geometries first

Step 2

Steps 2: Laser Cut the TroGlass Sheets

Place the first TroGlass sheet that you wish to process on the acrylic cutting grid table. Next, adjust the laser processing parameters.

Proceed to laser cut the sheet. Repeat this process for the other two TroGlass sheets.

NOTE: The optimal processing parameters may vary depending on your laser system's wattage.

Laser Parameters

Color	Process	Power (%)	Speed (%)	ppi/Hz
red	Cut CO2	100	1,2	5000

Passes	Air Assist	Z-Offset	Direction	Advanced
1	ON	-	-	-

Step 3

Step 3: Affix the Decorative Lettering to the Wall

Use the square TroGlass lettering cutout to mark where to drill holes in your wall. Next, use an electric drill or screwdriver to drill the mounting screws (in the standoff kit) into the marked places on your wall.

Once the holes are drilled, mount the standoffs. Finally, hang the square cutout and the lettering cutouts (in that order) on the standoffs. Finally, secure the acrylic lettering to the standoffs with an Allen key.

More Ideas

Experiment with different fonts to achieve different looks suited to your particular space (e.g., Courier New for a publisher's office)
Use TroLase Metallic Plus to attain a metal-like effect
Mix and match wood and TroGlass for an elegant twist to your decorative lettering

Explore Trotec's Materials Collections

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us