Create your own design, or import our template (below) and edit the file as you see fit. By using the Photo optimized Process Mode on JobControl®, you can achieve highly detailed photo engraving results. More Photo Engraving Tips & Tricks Send your design to your Speedy system by using the following settings:

Send the job to your laser by using the processing parameters described below. NOTE: The optimal cutting and engraving parameters may vary depending on your Specific Speedy system and its available wattage.

Remove the protective foil from the Pink/White TroLase sheet, and place it on your laser's work area. Cover the remaining space (e.g., with standard printing paper) to maximize the vacuum's suction force on the TroLase sheet. Then proceed to cut and engrave the material. When the job is complete, wipe away any remaining residue with a slightly damp cloth.

To add a little extra pizzazz to our menu cover, we added a checkered strip made from TroLase Thine Black/White. To achieve the same look, you may also use our template (below). Send the checkered strip file to your laser using the print settings below.

Put the Black/White TroLase Thins sheet on your laser's work area, and remove the protective foil. To achieve the best results, be sure to run the engraving job (from bottom to top) before cutting.

Once the checkered strip is processed, clean it with a slightly damp cloth. Once both the menu card and the checkered strip are dry, remove the sticker from the strip to expose its adhesive backing. Carefully position the strip on the photo-engraved menu cover. Finally, combine the front cover, menu pages and back cover, and secure them with a binding ring or screw post. Voilà! You are now ready to present your menu.