Contoured exterior signage made of printed acrylic

Important: Make sure that in the Corel print window, the color black is already stored in the parameter selection with the process "register marks." This will help you recognize the registration marks later in JobControl®.

Place the printed acrylic face-up on the acrylic blades in your SP3000. Cover the remaining working surface. The parameters may vary depending on the laser machine used and available laser power:

To achieve a special three-dimensional effect, the lettering of the sign is glued on colored TroGlass. We cut it with a Speedy 400. To do so, send the logos with the following settings to your Trotec laser.

Tip:

If you attach the lettering freehand without a template, you can also save space by turning the letters and arranging them nested in order to save material.

Now place the respective TroGlass sheets on the acrylic grid cutting table in your Speedy 400, cover the rest of the processing surface and cut out the various lettering. The parameters may vary depending on the laser machine used and available laser power:

Tip:

We have set a framework around the word "Chicago." After the laser process, we secure the letters to the frame with tape so that the entire word can be glued in the perfect alignment.

For finishing, peel off the protective film on the front of the acrylic shield. First, place the lettering loosely on the sign. If you are satisfied with the orientation, stick each letter one after the other on the acrylic shield. The lettering "Chicago" we place at the end, as soon as the word "jazz club" is fixed. The contour-cut sign made of TroGlass is finished, which you can easily attach to the wall using wall spacers.