Upload our provided template, remember that you can always change it as needed. Send the graphics to the laser using the driver settings below.

Print settings:

Define the correct material settings. The laser parameters may vary depending on the type of laser machine and available laser power.

Laser Parameters:

Start the assembly be removing the protective film from the clear acrylic. Next, begin to apply the orange arrow. Once that is complete, you can then add the arrows that were made out of TroGlass Satins orange, TroGlass Color Gloss yellow and white. Then place the red acrylic sheet directly underneath the arrows. For the "Diner"-characters start by placing TroGlass Color Gloss Metallic on the bottom layer. On top of that, add the white and blue letters. The final part will be to place the white highlight circles on top of the orange arrow.