--------------------------
lasercut neon sign 1

Sign "Flamingo"

TroGlass Neon appears particularly colourful and bright when it is backed with white acrylic glass - as with this sign. TroGlass Neon is available in four different colours. Try different colour variations and combinations to suit your taste!

Preparation

Material required for the sign, outer diameter approx. 29cm
  • TroGlass Neon Pink, 3mm - self-adhesive: 606 x 301 mm (1/4 plate)
  • TroGlass Neon Green, 3mm - self-adhesive: 606 x 301 mm (1/4 plate)
  • TroGlass Satins white, 3mm: 606 x 301 mm (1/4 plate) 

Browse full TroGlass Neon materials range

Machine used
  • Speedy 360
  • 80 watts
  • 2" Lens
  • Nozzle with large hole diameter
  • Acrylic cutting grid table

The sign can also be produced with another machine of the Speedy laser engraver series. Adjust the parameter settings according to your machine.

Step by step

acrylic sheets troglass neon
Step 1

Step 1: Import/create print & laser file

Create your own design or use our template. Now send the job to the laser with the settings below. Send the job to the laser with the settings below.

Print settings

Process mode Resolution Cut line
Standard 500dpi none
Halftone Others
Color Optimized geometries, inner geometries first, minimize to job size
laser parameter troglass neon
Step 2

Step 2: Laser process

Now make the parameter settings. All three TroGlass panels are cut with the same settings. Our suggested parameters may vary depending on the laser machine used and the available laser power.

The blue cutting lines on the white base plate serve as a marker for the correct positioning when gluing the neon-colored elements and should be placed in front of the red cutting parameters if possible. In this way an optimal cutting result can be achieved.

Place the first TroGlass plate in the laser unit. Leave the protective foil on the material. Close the device and start the appropriate cutting process. Then cut the other two plates as well.

Laser parameters - TroGlass 3mm:

Color Process Power (%) Speed (%) ppi/Hz
Blue Cut CO2 10 1 1000
Red Cut CO2 50 0.2 5000
Passes Air Assist Z-Offset Direction Advanced
1 ON 3 - -
1 ON - - -
assemble neon sign
Step 3

Step 3: Assembly

After the laser process, remove all cut parts from the laser machine.

Now you can remove the protective foil from the top of all cut elements.

Then remove the protective film from the back of the coloured elements and stick on the individual parts one after the other. The marking lines on the white base plate serve as orientation.

lasercut neon sign 3

Why should I use TroGlass Neon?

TroGlass Neon catches eyes with bright colors: pink, yellow, orange and green. These four refreshing neon colors draw attention and thus become the highlight of every product.

TroGlass Neon combines the advantages of opalescence and striking fluorescence in one product. However, it is not only the appearance but also the optimum properties such as excellent resistance to outdoor weathering that make this product attractive.

Bring your products to life with this cast acrylic glass:

Full product range

neon sign flamingo

Inspiration

In the file you will also find a template for a larger sign with an outer diameter of about 59cm. So you can make the sign in two different sizes. Of course you can vary the colours according to your wishes!

TroGlass Neon stands out particularly well against a dark background - making the sign a great eye-catcher!

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo