--------------------------
sign made of plastic and acrylic

Multi Layer sign
laminates and acrylics

One sign, four layers, different sign making techniques. Engraving and cutting is combined with multi layer technique and dimensional lettering. Use backlit with LEDs to put the sign in the best perspective.

Preparation

Required material
  • Acrylics and Laminates/engravable plastics (we used 3mm, 6mm and 10mm acrylics)
Used Trotec Laser
  • Speedy 360
  • 100 watts
  • 2 inch lens and 2.5 inch lens
signature-multi-layer-JC.zip

ZIP

Download now
csm_signature-multi-layer_5e98c7dab3.png

PDF

Download now

Step by step

Step 1

Step 1:

Open the template in your graphics software then send it to the laser. The settings for speed and laser power vary depending on the machine you use. This is what we recommend:

Black (engraving) Power: 60 %, Speed: 100 %, Resolution: 500 dpi, air assist on, z-Offset: +1 mm

Tip:

Use reverse engraving to protect your materials from dust and keep them clean.

 
Step 2

Step 2:

Red (cutting)

  • 3 mm Acrylics
    Power: 40 %, Speed 0,2 %, Frequency 20.000 Hz, air assist on
  • 6 mm Acrylics
    Vector engraving Power: 10 %, Speed 1 %, Frequency 2000 Hz, air assist on
    Cutting: Power: 95 %, Speed 0,2 %, Frequency 20.000 Hz, Z-offset -2 mm, air assist on
  • 10 mm Acrylics
    Cutting: Power: 95 %, Speed 0,1 %, Frequency 20.000 Hz, Z-offset -3 mm, air assist on
Sign laminates acrylics
Step 3

Tips:

  • Use the 2 inch lens for engraving the laminate and for cutting 3mm acrylics
  • For cutting acrylics of 6 or 10mm, use the 2.5 inch lens and keep in mind that a good exhaust is essential to cutting acrylics well
  • Prepare the layers with double-sided adhesive tape, reducing assembly time to just a few minutes
  • Engraving the baseplate and the laminate helps for the correct positioning
  • Mounting a top layer on the 10mm acrylics creates a visual multi-dimensional effect

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo