Preparation
Required materials:
TroGlass Duo Caribbean Sea 1001448
TroGlass Duo Lemon Drop 160825 with adhesive backing
TroGlass Duo Orange Sunset 1001445 with adhesive backing
TroGlass Duo Terra Cotta 1001444 with adhesive backing
TroGlass Duo Deep Blue Sea 1001446 with adhesive backing
TroGlass Duo Pepper Mint 1001447 with adhesive backing
Machine used:
- Speedy 400 Flexx
- 120 watt CO2 laser power
- 2 inch lens
- Aluminum Cutting Table
Settings for machine:
| Laser cutting | Vector marking base plate |
| Power 50% | 8% power |
| Speed 0.5% | 8% speed |
| 20000 Hz | 20000hz |
| LC 10% | LC 80% |
Step by step
Tips
1. To reduce the risk of flaming, cover the open areas of the laser bed to maximise extraction
2. Vector mark the design into the base plate to reduce requirement for manual alignment post-processing
3. Clean the base material with an anti-static cleaner to remove dust and debris created during laser processing
4. Do not use harsh chemicals to clean the material as this can damage the surface
Assembly
Clean the base material and leave to dry. Once dried, remove the adhesive backing from the cut elements and affix to the base material.
![](/static_processed/c0a268de0cb61e2d077a76267607f3ce/creative-troglass-duo-beach-sign1.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/Layered-Miami-Beach-Sign/creative-troglass-duo-beach-sign1.JPG","edits":{"resize":{"width":940,"fit":"cover"}},"outputFormat":{"format":"webp"}})
![](/static_processed/e212f65db29f654cc6aef0ae732b4881/creative-troglass-duo-beach-sign2.jpg?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/Layered-Miami-Beach-Sign/creative-troglass-duo-beach-sign2.JPG","edits":{"resize":{"width":940,"fit":"cover"}},"outputFormat":{"format":"webp"}})
![](/static_processed/5b58a61a467804661df93e96a66f70dc/laser-engraver-speedy-400-left.png?{"image":"https://backend.troteclaser.com/static/images/Laser_Machines/Speedy_Series/laser-engraver-speedy-400-left.png","edits":{"extract":{"top":142,"left":497,"width":933,"height":393},"resize":{"width":650,"fit":"cover"}},"outputFormat":{"format":"webp"}})
![](/static_processed/39b137145fe3b080cdb057970b3d2919/contact-ferdinand.jpg?{"image":"https://backend.troteclaser.com/static/images/contact/contact-ferdinand.jpg","edits":{"resize":{"width":194,"height":194,"fit":"cover"}},"outputFormat":{"format":"webp"}})
![](/static_processed/8441e87527d1605700a2e1442ea8f117/tluk_2024_print_cut_event_edinburgh_october_popup.jpeg?{"image":"https://backend.troteclaser.com/static/images/events/en-gb/2024-Print_Cut-Events/TLUK_2024_Print_Cut_event_Edinburgh_October_PopUp.jpeg","edits":{"resize":{"width":480,"height":480,"fit":"cover"}},"outputFormat":{"format":"webp"}})
