--------------------------
seal press laser engraved

Seal press plates

Engrave your own custom die plates for seal presses

Add an individual touch to your letters and invitation cards with a stylish embossing. We show you how to engrave your own die plates for seal presses with your Trotec laser.

In case you are interested in more information on seal presses visit the Trodat website.

Preparation

Required material
  • Standard Delrin sheets for engraving and cutting out embossing plates, seal presses for high-quality paper
Used Trotec Laser
  • Speedy 300
  • 60 watts
  • 1.5 inch lens
Seal Press Plates

ZIP

Download now
Seal Press Template

PDF

Download now

Step by step

delrin stamping pliers
Step 1

Step 1: Cut and engrave the embossing plates

Create your own design for the die plates or use the one we've prepared for you. Then send it to the laser with the parameters below for cutting and engraving. The laser parameters may vary, as they depend on the machine used and the available laser power.

RECOMMENDED PARAMETERS:

Engraving (black): Power: 60%, Speed: 20%, Frequency: 500ppi, Air Assist: On

Cutting (red): Power: 50%, Speed: 1%, Frequency: 1000Hz, Air Assist: On

embossing fine paper
Step 2

Step 2: Glue the plate to the seal press

Take the newly made die plate out of the laser and clean it thoroughly. Simply wash the finished Delrin die plates with water and a little soap or dish liquid and wipe off any still adhering dust with a brush. After gluing the plate to your seal press you can start embossing fine papers.

embossed foil seal
Step 3

Alternative: Engrave a text plate for a rubber stamp

You can also use the embossing plate design for engraving a text plate for a rubber stamp. We've made a separate CorelDraw file for this. Make sure to adjust your laser to the parameters below when engraving the rubber text plate.

RECOMMENDED PARAMETERS:

Engraving (black): Power: 100%, Speed: 12%, Frequency: 600ppi, Air Assist: On

Cutting (red): Power: 80%, Speed: 0.7%, Frequency: 1000Hz, Air Assist: On

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo